How does the Clover 5 work?
Place the Clover 5 on or near the text or picture to be enlarged. The text will then be magnified and shown on the Clover’s screen. If you hold the Clover 5 up to 2 inches above a text, you will always have a clear image and you will be able to read the text perfectly. You can view the text in color or change the contrast to black / white or white / black.
How many color contrasts does the Clover 5 have?
The Clover 5 has six Simplified Color Combination and 20 Integrated Color Combinations.
How much does the Clover 5 weigh?
The Clover 5 weighs 9oz (including battery).
Can I replace the batteries myself?
Yes, there is a rechargeable Li battery and it is end-user replaceable.
What is the magnification size of the Clover 5?
The Clover 5 will magnify 4x – 20x.
Can I write under the Clover 5?
Yes, open the writing stand and you can write under the camera.
How to I turn on/off the beep sound?
Press and hold the freeze frame button for 3 seconds to turn on/off the beep.
How do I view the additional 20 high-contrast color combinations?
Hold the Color Mode Up button and the Color Mode Down button at the same time for 5 seconds to switch between the Simplified Color Combination List and the Integrated Color Combination List.
How do I adjust the screen brightness?
To increase brightness: Press the POWER button and ZOOM IN button at the same time.
To decrease brightness: Press the POWER button and ZOOM OUT button at the same time.
How do I turn the LED lights off when there is too much glare?
Press the POWER button and FREEZE button at the same time to turn on/off the LED lighting.
How do you connect the Clover 5 to a larger screen such as a TV?
First, plug the TV cable into the TV port on the device, then set the TV output mode to NTSC.
Do I have the change my settings before each use?
No, the unit will automatically memorize the most recent settings such as color mode, magnification etc. and will apply these settings when you turn the device on again.
Troubleshooting:
The unit does not turn on
- Connect to the power adapter
- Charge the battery
- Reinstall the battery
What do I do if the image doesn’t change?
Most likely, the you have tapped the “Freeze Frame” mode. Tap the red button on the top right side of the device to exit “Freeze Frame” mode.
How will I know when the battery is fully charged?
When the unit is on, tap the power button check the battery level.
How do I turn off the beeping sound?
Press and hold the freeze button for 3 seconds to turn on/off the beep
How do I find more color contracts modes?
Press the Color Mode Up button and the Color Mode Down button at the same time to quickly switch between Full color mode and current Enhanced Contrast mode.
How do I change the brightness level?
– Pressing the Power button and Zoom In button, increase the brightness
– Pressing the Power button and Zoom Out button, decrease the brightness
How do I turn on/off the LED lighting?
Pressing the Power button and Freeze button turn on/off the LED Lighting
How can I connect the Clover 5 to the TV?
– When plugging the TV Cable in the TV port on the unit, you need to select the appropriate TV output mode (PAL or NTSC mode).
– Press Zoom In button or Zoom Out button to choose PAL or NTSC modes, then press Freeze button to confirm your selection and then the image shall be shown on TV.
Why does my device keep turning off?
– Your battery might have insufficient charge
– There is a power-saving mode that will turn the device off if there is no movement in 3 minutes time.
