Description
Enabling Sound Activated Switch - 1051 in Canada.
Our Sound Activated Switch creates an accessible activation experience for those with higher mobility challenges, allowing them to operate an adapted device by making a quiet noise.
Add the switch to switch-adapted devices like adapted toys, kitchen appliances, lamps and computers for convenient voice-activated control. These switches promote benefits like:
- Enhanced learning opportunities.
- Easier access to current technology and information.
- Higher self-sufficiency and self-esteem.
There are three convenient operation modes, including:
- Timed mode: You control the duration that the switch remains on after activation. Select between 1 second and 120 seconds.
- Latch mode: This option uses one sound to turn an adapted device on and a second to turn it off automatically.
- Momentary mode: The switch remains activated as long as it hears a sound and automatically shuts off when it detects no more noise.
Additional features of the Sound Activated Switch include:
- Fully adjustable sound sensitivity levels: The voice-activated switch is sensitive to sound and will work whether the user whispers or claps loudly. The microphone near the device’s top panel will sense the sound and activate the device. You can set the sound sensitivity based on the user’s abilities using the sensitivity knob.
- Comprehensive one-year warranty: We are confident in our Sound Activated Switch and offer one year of warranty protection.
- Simple connection with standard 1/8-inch jacks: To set up this switch, you need to use 1/8-inch jacks to connect the toy or device to the Sound Activated Switch.
- Convenient battery operation: Install one 9-volt battery in the battery compartment to power the switch.
- Compact footprint: The switch is 4 ½ by 2 ¼ inches and weighs 4 ounces.
FAQ
-
Q How many volts will this put out?
- A This is a switch it does not put out any volts. When it is activated it makes what is called a switch closure.
A This is a switch it does not put out any volts. When it is activated it makes what is called a switch closure.
-
Q What is the current/amp capacity of the relay(switch)?
- A Please contact us at customer_support@enablingdevices.com Theses switches intended use is for battery powered adapted devices and toys.
-
Q What kinds of Jack's for wires.
- A This switch uses the industry standard 1/8 inch mono female phono jack.
-
Q Can this device be connected to a regular hospital bed for a disabled patient to control the bed functions with just a whisper?
- A No.
-
Q The top questions tell you what it won't do. it wont turn off/on a phone. It won't turn on/off a TV. WHAT WILL IT DO THEN?
- A This switch is made to work with switch adapted products. Keep in mind this is a sound activated switch and not a voice recognition switch. Ambient noise or sound close to the microphone could cause false activation. It could be used with an adapted TV remote if the switch was close to the users mouth and the sensitivity was set low so that the sounds from the TV would not false activate it. But if there was a very loud sound or noise from the TV it could still set it off. Ideally it would work best with adapted devices that did not produce loud sounds.
-
Q Will it turn a tv on
- A This type of switch is not suitable for any device that puts out sound as you will get false activation's. It could be used to Turn ON/OFF a TV when used with our No. 5150 TV Remote Module but is not recommended.
-
Q Will it turn a phone on or off
- A No this will not work for any type of phone